Allworx 6x Installation Guide download pdf (Page 10)

6x Server Installation Guide

300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com

Version 2. Revised: January 26, 2009

Page 6

5 Electrical

5.1 Chassis Ground

Warning: Failure to follow these steps may result in equipment damage, personal injury, and void the

product warranty.

To help prevent electrical shock, the separate protective earthing terminal located next to the power jack on the

rear panel must be permanently connected to earth using 18 AWG wire or larger. (See Figure 2 item 16)

5.2 Power-Up Sequence

Connect the unit to the power source with the AC power adapter. The server will automatically begin to power

up. As it progresses through the power up sequence, the front panel lights will respond as shown in Table 2.

Front Panel Light Power-Up Sequence Description

Power

Flashes green as the power up sequence

progresses; lights steady green when the unit is

ready.

Drive Activity – CF

Flashes green when drive mounted; flashes off for

activity.

Table 2: Front Panel Lights During Power-Up Sequence

5.3 Safe Mode Sequence

When the unit is off, if the power button is held greater than 1 second when turning the unit on, the power light

will change from Green to Amber indicating that the unit will start in Safe Mode. Once the power button is

released the, the power button will change to Red very briefly indicating that the reset sequence has begun.

Once the 6x is in Safe Mode, the front panel lights will be displayed as shown in Table 3.

Front Panel Light Safe Mode Light Description

Power Solid Amber

Drive Activity – CF Off

Line Interface Indicators Solid Amber

Table 3: Front Panel Lights in Safe Mode

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 21 22

No comments

Allworx 6x Installation Guide Page 10