Allworx 9212 Phones User Manual download pdf (Page 13)

Allworx Phone Model 9212/9212L User Guide

+1 866 ALLWORX * +1 585 421 3850 Page 5

www.allworx.com

Revised: 5/21/14

2.2 Adjust the Phone Angle

The phone base angle adjusts for easier phone screen reading.

To adjust the phone base angle:

1. Unplug the phone from the PoE or the power supply. Remove the handset from the hook

and lay the phone face down on a soft surface.

2. Hold the base with the fixed tabs facing the bottom of the phone. Select one of the three

available positions to connect the base to the phone. The set of holes at the bottom of

the phone provides the steepest angle.

3. Place the fixed tabs in the preferred holes on the back of the phone. Rotate the phone

base upwards until the flexible tabs click into place.

To remove the base:

1. Remove the handset from the hook and lay the phone face down on a soft surface.

2. Press down on the flexible tabs and rotate the base towards the phone bottom until the

fixed tabs easily lift out of the holes.

2.3 Volume Adjustment

The volume of the incoming ring, handset, speaker phone, and the headset is adjustable.

To adjust the incoming call volume:

1. Locate the phone volume bar. Do not lift the handset or turn on speaker phone.

2. Press the volume bar – (decrease) or + (increase) to adjust the incoming ring audio level.

The phone plays the audio tone.

To adjust all other volumes:

1. Pick up the handset or turn on the speaker phone or headset. Locate the phone volume

bar. The phone screen displays which audio path is being adjusted.

2. Press the volume bar to – (decrease) or + (increase) the audio level.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 49 50

No comments

Allworx 9212 Phones User Manual Page 13