Allworx 9212 Phones User Manual download pdf (Page 14)

Allworx Phone Model 9212/9212L User Guide

Page 6 +1 866 ALLWORX * +1 585 421 3850

www.allworx.com

Revised: 5/21/14

2.4 Wall Mounting (Optional)

2.4.1 Wall Mounting Plate

Mounting the Allworx phone on a wall requires a mounting plate that meets the TIA-570-B,

Section standard and is available from a local telephone company or local retailer. The

mounting plate has studs that position the Allworx phone flush to the wall surface.

Remove the Allworx phone base and mount the phone over the mounting plate studs. All power

and RJ-45 cable connections should exit between the phone back and the wall, and then routed

to the network connection and/or a power connection.

2.4.2 Handset Retainer Clip

The handset retainer clip prevents the handset from slipping out of the phone cradle while

hanging on a wall.The Allworx phone ships with the adjustable handset retainer clip in the wall

mount position on the phone cradle.

To adjust the retainer clip for desktop use (for easier handset removal/hang-up) insert a coin in

the retainer clip slot and turn the coin clockwise, 180 degrees. To return the retainer clip to the

wall mount position, insert a coin in the retainer clip slot and turn the coin counter-clockwise,

180 degrees.

Caution:

If using a standard telephone wall mount plate, DO NOT connect to the RJ-11 jack. This

connection is for analog phones and may cause damage to the Allworx phone, which

voids the warranty.

Leviton 4108W-0SP

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 49 50

No comments

Allworx 9212 Phones User Manual Page 14