Allworx 24X Installation Guide download pdf (Page 14)

24x Installation Guide

300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com

trademarks or registered trademarks of their respective owners.

Revised: February 7, 2007

Page 11

6 Server Configuration

The Allworx 24x provides an administrative interface to configure and administer the server. The administrative

interface is accessed using a web browser. Assuming the network settings are set to their factory defaults, the

steps to connect to this interface are:

1. Plug your PC directly into the LAN port.

2. Set up the PC’s network interface to obtain an IP address automatically (using DHCP).

3. You may need to release and renew the PC’s IP address, from Windows Command Prompt, to get an

address from the server.

4. Verify that the PC has an IP address on the 192.168.2.xxx network.

5. Open your browser and enter the server’s default URL of

http://192.168.2.254:8080, or currant LAN IP

address for server.

6. When the Welcome to Allworx page appears, login using the default password of admin.

When the Home page appears, click on the Install Checklist link (on the left hand side) to bring up a new

window containing steps necessary to set up a new system. Each brief step description is followed by a link to

get to the appropriate administrative web page to execute the step. These steps are ordered to aid in a

successful configuration. Most of the web pages used to execute each step contain detailed feature

descriptions and help instructions that are required to carry out the step. Use the Allworx System

Administration Guide

as a supplement for the information on the web pages when necessary.

If the server has been previously configured for another installation, you should restore it to its factory default

configuration. This can be done by:

1. Rebooting the server to Safe Mode by holding down the power button when the server is off, or selecting

Maintenance (on the left hand side), Restart, and Enter Safe Mode after restart.

2. Format the disk and perform a Software Update (See Allworx System Administration Guide

** for

instructions).

Allworx System Administration Guide for the 24x can be found at www.allworx.com/downloads.asp

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

No comments

Allworx 24X Installation Guide Page 14