Allworx 24X Installation Guide download pdf (Page 18)

24x Installation Guide

10 Accessories (Optional)

Note: A stereo splitter (not included) is required to use both Music-On-Hold and Overhead Paging collectively.

10.1 Music-On-Hold

Connect the output from your music system to the server using a Y-Adapter Audio Cable [part#: 42-2551]

(See

Figure 6). Insert the 3.5mm stereo plug (See Figure 7) into the audio connector labeled Line IN/OUT on

the front panel (See

Figure 1 item 11).

Note: Only the white audio channel is used for music input (See

Figure 6).

Figure 6: Y-Adapter Audio Cable Figure 7: Audio Plug Diagram

10.2 Overhead Paging

ur paging system using a Y-Adapter Audio Cable [part#: 42-2551] (See

ote: Only the red audio channel is used for paging output (See Figure 6).

Line In

Line Out

GND

Connect the server to the input of yo

Figure 6). Insert the 3.5mm stereo plug (See Figure 7) into the audio connector labeled Line IN/OUT on the

front panel (See

Figure 1, item 11).

300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com

trademarks or registered trademarks of their respective owners.

Revised: February 7, 2007

Page 15

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24

No comments

Allworx 24X Installation Guide Page 18